PowerShield Defender 1600VA
PSD1600

Features:
Excellent microprocessor control guarantees high reliability
Australian outlets for UPS Protection (x3)
Australian outlets for Surge protection (x3)
Boost and buck AVR for voltage stabilization
User replaceable batteries
Silent Operation (No fans included)
Auto restart while AC is recovering
Off-mode charging
Cold start function
USB communication with sophisticated NetGuard software

Specifications:
Model: PSD1600
Capacity: 1600 VA / 960 W
Input:
Voltage (Nominal): 240 VAC (Australia)
Voltage Range: 177-290 VAC
Frequency Range: 50/60 Hz +/-5Hz (auto sensing)
Output:
Output Voltage: 240Vac Australia
Output Voltage Regulation: 240Vac?10[[][%]]
Frequency: AC mode tracks utility. Battery Mode 50Hz+/-1[[][%]]
Frequency Range (Batt. Mode): 50 Hz or 60 Hz ?1 Hz
Transfer Time: Typical 2-6 ms, 10ms max.
Waveform (Batt. Mode): Simulated Sine Wave
Australian Outlets - UPS Protection: 3
Australian Outlets - Surge Protection: 3
Battery:
Battery Type & Number: 12V*9AH (x2)
Backup Time (One PC load @ 120 W): 45 min.
Typical Recharge Time: 4-6 hours recover to 90[[][%]] capacity
Protection:
Full Protection: Overload, discharge, and overcharge protection
Safety: EN62040-1-1 2003, IEC60950-1:2001
EMC: EN62040-2 2006
Communications & Management:
USB interface: PowerShield NetGuard Supports Windows®, Linux, Unix, and MAC
Smart LCD:
Input voltage
Output voltage
AC mode indicator
Battery mode indicator
Load level indicator, flashing indicates overload
Battery capacity indicator, flashing indicates low battery level
Audible Alarm:
Battery Mode: 2 beeps every 30 secs
Low Battery: Rapid Beep (one sec intervals)
Overload: Constant Beeping
Battery Replacement Alarm: Constant Beeping
Fault: Constant Beeping
Operating Environment:
Humidity: 0-90 [[][%]] RH @ 0-40?C (non-condensing)
Noise Level: Less than 40dB
Physical:
Dimension, D X W X H (mm): 397 x 146 x 205
Net Weight (kgs): 11.5