Description

Repeates the data signal and forward the PoE to the Camera - PoE+ Compliant, it is compatible with all cameras. No additional power supply is required. The maximum total distance between switch and camera depends on the power input and the power requir ed by the camera, but all cameras can be at least extended to 200 meter connection.

Ethernet and PoE connections both restrict cable distances to 100 meters (328 ft.) between network ports. To overcome this distance limit, network installers can simply connect an AXIS T8129 PoE Extender in-line with the Cat-5e or Cat-6 cable. 

With AXIS T8129 PoE Extender, Axis’ network video products
can be installed at greater distances than 100 m
(328 ft.) from one another. By connecting AXIS T8129 for
every extra 100 m (328 ft.) of cable, both Ethernet and
PoE can be extended to 200 m (656 ft.), 300 m (984 ft.),
or even greater distances; depending on camera model
and power source.
AXIS T8129 PoE Extender is compatible with all Axis
network video products supporting PoE. Range depends
on the power required, so a 25 watt PTZ dome camera
may be located 200 m (656 ft.) away using a single
AXIS T8129. Or, the cable length to a regular 5 watt
network camera may extend up to 400 m (1312 ft.), by
fitting three AXIS T8129 at 100 m (328 ft.) intervals.

AXIS T8129 does not require any additional power supply and the connected network camera is fed by a single PoE switch or midspan, which simplifies installation. AXIS T8129 offers two Ethernet ports, which are both configured automatically for link speed, duplex and crossover and the full-rate network throughput is maintained.