Checkout
    My Account
    My Cart |
    main product photo

    IP-COM ( G1116P-16-150W ) 16-Port Gigabit Desktop/Rackmount Switch With 16-Port PoE

    $291.00
    SKU:388506
    MPN:G1116P-16-150W Link
    Manufacturer:https://www.ip-com.com.cn
    Brand: IP-COM
    Warranty:Standard Manufacturer's Warranty
    Availability:

    In stock

    Fright Estimate
    Add to Compare

    Compliant with IEEE802.3, IEEE802.3u, IEEE802.3x, IEEE802.3ab, IEEE802.3af, IEEE802.3at
    Store & forward, share memory, non-blocking architecture
    Supports MAC address self-learning and auto MDI/MDIX
    Provide 16 10/100/1000Mbps auto-negotiation ports with 16-port PoE
    Ports 1-16: IEEE 802.3af/at PoE ports
    Supports full-deplux 802.3x flow control and half-duplux backpressure flow control
    Supports 8K MAC address list, MAC address learning and auto-ageing
    Supports port Inductive Lightning Protection up to 6KV
    Fanless design
    maximum power output of the switch: 135W
    Hardware DIP switch for selection among the Standard, CCTV, VLAN, and Isolation modes.

    Standard&Protocol IEEE 802.3、IEEE 802.3u、IEEE 802.3x、IEEE 802.3ab、IEEE802.3af、IEEE802.3at
    Indicator 16*Link/Act per device
    16*PoE per device
    1*Power per device
    Interface 16 10/100/1000Base-T ports(Data/Power)
    Port Lightning Protection 6KV
    Store and forward Yes
    Exchange Capacity 32 Gbps
    Packet forwarding rate 23.6Mpps
    MAC Address Table 8K
    PoE supply management Port 1-16 support IEEE802.3at/af PoE standard
    PoE through pin 1 2 4 5 +;3 6 7 8 -
    Voltage input range AC: 100-240V～50/60Hz
    Dimensions 294*178*44mm( W x D x H )
    Power Consumption in full configuration:<150W
    PoE Max Power Supply:135W
    Port Features Standard: the switch functions as a common unmanaged switch and all the ports of the switch can communicate with each other.
    CCTV: the port cache is optimized and PoE ports 1-8 have higher priorities over the other ports. All the ports of the switch can communicate with each other.
    VLAN: ports 1 to 14 are isolated from each other, but can communicate with ports 15 and 16 (uplink ports) respectively.
    Isolation：ports 1 to 14 and ports 15 to 24 belong to two different VLAN.This mode can be used to isolate supervision network and wireless network to make them not interfere with each other.